Original Xhorse V2.1.0 VVDI MB BGA Tool Benz Key Programmer Including BGA Calculator Function For Customer Bought Xhorse Condor cutter Only
Latest Software Version: V2.1.0
You Can Only Buy This One When You Have Already Bought Condor Key Cutting Machine ( IKEYcutter CONDOR XC-007 Master or Original iKeycutter CONDOR XC-MINI ).
Or Can't Sell At This Price.
Xhorse VVDI MB BGA TOOL Function Introduction:
- Support BE key, read password and prepare new key via IR.
- NEC V051,V057 support on board get password
- All NEC keys support on board write and erase
- Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
- Support renew EIS and ELV
- Support write EIS and ELV
- Support online generate key file
- Unlock ELV function will be released soon.
- Renew other control modules function will support soon
Notice:
BGA Calculator Password is free to get once a day. For second time, price is 44.99USD. It takes 4 minutes to collect data, and 2 minutes to calculate.
Require firmware V2.0.7
===== BENZ V2.0.7 =====
1. Attention: All user update device to firmware v2.0.7, software v2.0.7, the lower version dont support password calculation
2. User manual v1.2 released, overview v1.3 released
3. Add support for renew ECU/Gearbox/ISM etc
4. Fix diable key in K-Line protocol
5. Fix clear TP in K-Line protocol
6. Fix read key bug in password calculation
7. Bugfix
Require firmware V2.0.6
VVDI MB TOOL Latest Version V2.0.7 Update(2016-02-26)
Require firmware V2.0.7
===== BENZ V2.0.7 =====
1. Attention: All user update device to firmware v2.0.7, software v2.0.7, the lower version dont support password calculation
2. User manual v1.2 released, overview v1.3 released
3. Add support for renew ECU/Gearbox/ISM etc
4. Fix diable key in K-Line protocol
5. Fix clear TP in K-Line protocol
6. Fix read key bug in password calculation
7. Bugfix
VVDI MB TOOL Latest Version V2.0.6 Update(2016-01-16)
Require firmware V2.0.6
===== BENZ V2.0.6 =====
1. Attention: All user update device to firmware v2.0.6, software v2.0.6, the lower version dont support password calculation
2. User manual v1.1 released, overview v1.2 released
3. Add support for disable key
4. Fix bug for test W164, W221 EIS status
5. Fix bug for write EIS data
6. Bugfix
SK185 VVDI - MB TOOL V2.0.5 Update
1. Attention: All user update device to firmware v2.0.5, software v2.0.5, the lower version dont support password calculation
2. Add password calculation for lost all key. Support W166, W246, W212, W212(old). After success find password, it will need pay 2 calculation times
3. Password calculation with working key support: add working key test before data acquisition
4. Add EIS status test, working key test function
5. Fix bug for OBD read W203, W639, W463(K) EIS
6. Autodetect W212 EIS with ELV
7. Fix bug for read v51 key password via NEC adaptor
8. Add IR repair key function
9. Bugfix
Support Key Types Display:
Latest Technical Details:
VVDI MB BGA tool update goes well, the following workable models are for reference only.
Model Support IR/OBD:
W164, W164 2009+
A166, W197,W212, W218, A246
A169, W209, W211
W172, W204, A207
W203
W204, W207, W212 only by dump
W209 only by dump
W210
W215, W220
W230
W216
W221
W906
Keys Version Supported:
v03, v06, v08
v05, v07, v09
v59,v61
Package List:
Package List Diisplay:
Connection Display:
1. VVDI-MB TOOL device
2. IR adaptor
3. USB cable
4. NEC adaptor 1
5. NEC adaptor 2
6. NEC adaptor base PCB
7. K Line in OBD line
8. OBD line
Package List Diisplay:
Connection Display:
FAQ:
Q1: I test read data with obd2 210 k line working and 204 car read with obd 2 ,but 211 not read with obd2 cable connect
Q1: I test read data with obd2 210 k line working and 204 car read with obd 2 ,but 211 not read with obd2 cable connect
16 12v
4+5 GND
14 CAN_L
6 CAN_H
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
Can any one test?
A1:Read eis via obd for W164, W169, W211, W209, require gateway connected
A1:Read eis via obd for W164, W169, W211, W209, require gateway connected
