Menu

Opcom 2014V Can OBD2 For Opel Firmware V1.59 PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip Support Firmware Update

Opcom 2014V Can OBD2 For Opel Firmware V1.59 PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip Support Firmware Update

OPCOM 2012 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H,Zafira-B. It lets you read and clear fault codes, support many control units.Latest firmware version: V1.59

offer top quality Opcom 2014V Can OBD2 For Opel Firmware V1.59 PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip Support Firmware Update

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Opcom 2014V Can OBD2 For Opel Firmware V1.59 PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip Support Firmware Update

Opcom OP-Com 2014V Can OBD2 for Opel Firmware V1.59
 
 Reasons to Get OPCOM:
 
  1. Software Version: 2014V
     Hardware Version: 1.59
  2. OP-COM - PC Based Opel Diagnostic Tool
  3. Language: English
  4. With PIC18F458 Chip Support Firmware Update
 
Note: Never Update It Online, It Will Damage The OP-COM ! There is no need to active the software, can be used directly
 
Attention for Latest Opcom Software VAUX-COM_120309a.exe:
 
  1. If you run it on XP or Win7, please make sure you install dotnetfx35_SP1 system cookie, or Opcom software can't perform well
  2. When you install on Win7, please open laptop via administration, and read the installation video on CD carefully

OPCOM 2014V Function:
 
  1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
  2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
  3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
  4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
    PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
  5. Fault codes will be shown with all available information
 
OPCOM 2014V Feature:
 
  1. Full status information (Present, Not present, Intermittent)
  2. You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
  3. The program shows you measuring block information on many control module, you can choose anything from the list on your own.
  4. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
 
You can also run output tests on many controllers.
 
  • PIN6-PIN14
  • PIN3-PIN11
  • PIN1
  • HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
  • MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
  • SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
 
Package List:
 
  1. OP COM Interface
  2. USB Cable
  3. Software and Drivers CD
 

OP-Com 2014V Software: 




Go to Buy: Opcom 2014V Can OBD2 For Opel Firmware V1.59 PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip Support Firmware Update

Tags: Opcom Diagnostic Tool, Opel
Prev: Hot Sale IMMO Universal Decoding Remove The IMMO Code Of ECU
Next: OG72G/OF82B EEPROM Adapter for AK500+