TIROL T16897 12V LED Digital Battery/Alternator Tester with 6 Led lights Display Indicates Condition

Item Type: Battery Tester

Item Name: Led Digital Battery Tester

Place of Origin: Ningbo China (Mainland)

Brand Name: Tirol

Item NO.: T16897

Size: 12.4*5.1 cm

Weight: 115 g

Color:  Gray + Red

Features:  6 Led lights Display Indicates Condition

Product Description

Detailed Product Description

Features: 
Multiple functions: alternator state check, battery state check, check before charge and overload display. 
6-LED display, clearly present the alternator and battery state. 
Two testing clips for safe and easy operation. 
Small size and light weight, convenient to carry. 
Fit car, motorcycle, etc., with 12V battery.

• suitable for 12V lead acid batteries, hardtop batteries, discharge batteries and maintenance free batteries
• heavy duty insulated clamps.
• easy and safe to use, no sparking. And it with a good chip inside, so it is not easy to get hot on the surface
• six LED lights display indicates conditi

Specifications: 
LED quantity: 6 (2 red, 3 green and 1 yellow) 
Material of wire: 0.06square millimeter copper 
Max. voltage and current: 12V 15A 
Length of wire: 27cm / 10.6in 
Battery tester size: 12 * 5.2 * 1.8cm / 4.7 * 2 * 0.7in 
Battery tester weight: 67g / 2.4oz 
Package size: 25 * 14.5 * 2.5cm / 9.8 * 5.7 * 1in 
Package weight: 110g / 3.5oz 

Package including: 
1 * Battery Tester with Two Clips

For  checking  and  testing  the  battery  and  the dynamo  Connections

Checking the charging level
Functional test of the dynamo
Checking the battery starting capability
Battery overload display

Connections
Attach  the  cable  clip  of  the  red  cable  to  the  plus point  (+)  of  the  battery  and  the  cable  clip  of  the black cable to the minus point ( - ) of the battery. 

Checking the dynamo
Connect  the  testing  device.  Start  the  engine  and switch off the  headlights, radio etc. Start the engine again  and  switch  on  the  headlights,  radio  etc.  In both  cases,  the  green  signal  lamp  “GOOD”  must shine.  The  red  signal  lamp  “DEFECTIVE”  will  start to  shine  if  the  dynamo  supplies  no  or  very  little voltage.  Please  check  that  the  tester  is  connected correctly. Otherwise contact the car workshop. 

Checking the charging level
Switch  on  the  headlights  for  1- 2  minutes,  then switch  off  again.  Remove  the  cable  clips  from  the battery, wait approx. 10 minutes and then switch the testing  device  on  again.    A  signal  lamp  will  shine according  to  the  charging  status  of  the  battery indicating  "FULL"  ,  "HALF - FULL"  or  "VERY  LOW CHARGE". 

Start capability of the battery 
The  battery  needs  to  be  charged  up  to  the maximum.  Remove  the  connect ion  of  the  ignition coil and then connect the testing device. Try to start the vehicle using the key in the ignition switch. The engine cannot  start  (interrupted  ignition).  When  the green  signal  lamp  “BATTERY  OK”  starts  to  shine, the charging status of the   battery is OK.

Comment:  If  the  starter  is  not  OK,  the  signal  lamp “BATTERY OK” will start to go out regardless of the charging status of the battery.
 
WARNING! Only  perform  a  start  for  2- 3  seconds otherwise your catalyst could become damaged!

Led Display Indicates Condition

Alternator Check, Red(The First Light) Is Defective, Green(The Second Light)Is Well, Green(The Third Green Light) Is Fully Charged

Battery Check, Yellow(The Fourth Light)Is Half, Red(The Fifth Light) Is Little, Green(The Sixth Light) Is Ok

Certification: Ce/Rohs